January Bouquet Thank You Card

 

Hello Digi Divas Everywhere!  I just completed this lovely floral card using my first new drawing for 2025- January Bouquet.  I have a short tutorial for this card below.  If you would like a free copy of January Bouquet, scroll down.

Fall Sunshine Floral Card

Thank you for stopping by and sharing a part of your day with me.  Today I want to share with you this lovely autumn card using my new Fall Sunshine Floral Digi Set.  Spreading the beauty of Fall with a touch of sunshine to lift everyone's heart.  I made this beautiful image for a special friend who was in need of a little sunshine...  Using Beautiful Blossoms color pallet makes this card pop!   Come along for the journey of crafting this beauty.

The suggested card size is 5" x 7".

To start you will need my NEW set 5140J Fall Sunshine Floral.

Drew two (2) images, one 5" x 5" and one 

3" x 3".   Off set them within a half-page frame.  I drew white rectangles to block out the overflow of the images to fit the images in a 

7" x 4-1/8" frame.  Adjust to taste.   Copy and

paste.   Print on Hammermill® 100lb. White 

Coverstock. 

To keep your coloring in a straight line, apply a

strip of Washi®-tape along the printed image as shown.

Color as desired.  I chose to use Copic® markers with the Beautiful Blossoms color

scheme.  This is my favorite part.

The COPIC® Colors used:

Y00,  Y04,  Y13, Y15   -  Sunflower petals.

E30,  E33,   E35 -  Sunflower centers and used Copic Multi-liner Brown and x-Fine Sharpie to color some of the dots in the shadows.

Y06,  Y15,  R35,  R37,  R39  -  Daisy Mums.

YG61,  YG63,  YG69 and Copic Multi-liner Olive for the leaves and stems.

I later touched up to yellow in shadows with 

Micron 05 - Yellow.  (Never use Micron® until

all Copic® work is done.)

(For those who do not like coloring I have pre-colored images available.)

Cut the 2nd set of images apart and set aside for later.

Carefully remove the washi-tape along the

image edge.

Align the "Lace" edge die and run through

Big Shot®.  Align the die again, secure and

run through the Big Shot® again.  

Cut your edged image to 4-1/2" to 4-5/8" x 7" rectangle as shown.

Cut a 3/4" x 7" strip of Gold Metallic.  Set the

Sentiment, Dark Gray and Gold Metallic cardstock to the side for later.

Cut away 3/4" of the front flap on the 5" x 7" cardbase as shown.

Apply a 3/4" EZ-Tear® Tape to the interior outer edge of the cardbase.

Fussy cut the 2nd set of colored images as shown.

Apply foam tape to the backside of both the fussy cut images.   Set to the side.

This card has been fun in many ways, shopping through my stash.  Amazing

what we find...

Using Darice® Dotted Background Embossing

Folder, align with the edge of the image.

Hammer the embossing folder around the floral images for texture as shown.

Adhere the embossed image front panel to the cardbase using EZ-Tear® Tape.

Carefully align and adhere the fussy cut images to the front on the cardbase using the foam tape.   Trim the excess off along the card edges.

Using your sentiment die.   Cut one from the Dark Gray cardstock; and one from the Gold Metallic cardstock.

Using Bearly Art® Precision Glue, offset the two (2)

sentiments to give a little depth.   Let Dry.

Apply foam tape to the backside of the sentiment

as shown.   

Apply the sentiment middle of the embossed

area between the two flower images as shown.

Apply the 3/4" x 7" Gold Metallic strip to the interior edge of the cardbase as shown.

Using about 30" of Gold Metallic twine, wrap it twice around the card spine and tie a bow.

I like to add an optional touch to my cards.  

OPTIONAL:  Using scraps from making the

card, arrange and adhere to the backside of the card with your name plaque.

Thank You for sharing a part of your day with me.  I hope you enjoyed this journey and my NEW #5140J Fall Sunshine Floral Digital Stamp Set available at my shop on Etsy...  I invite you to join me again.  Stop by and share your beautiful floral creations with us at Beautiful Blossoms monthly challenge.

Hugs,

Jan

I would like to share this creation with the following:

Beautiful Blossoms Challenge

Fanciful Sweet Peas Card

 Hello Crafty Divas and Flower Lovers, I am so excited you stopped by to share a part of your day with me and allow me the opportunity to share my new, fanciful SweetPeas Digi Set with you.  I wanted something fresh, fanciful and delicate like the Sweet Peas in my neighbor's backyard garden.  She has a magical green thumb.  She shares her beautiful blossoms with me- gorgeous bouquets that inspire me!  Come along as I take you on a journey through her flower garden.  This card was created for the Beautiful Blossoms Challenge.

Suggested card size:  5" x 7"  

To start this Sweet Pea of a card you will need my NEW Sweet Peas 5135J Digi Stamp Set 

available my shop on Etsy.

  

Using the cluster stamps 2 and 3, size the Sweet Peas cluster 2 image to 3-3/8" x 6-1/4" and place on the left half of page; size the Sweet Peas cluster 3 image to 3-3/4"x 6-1/4" and place on the right half of the page.  Print on Hammermill® white 100 lb. Coverstock.

   

                                                                                                                                                                                                                                                            Color your images as desired. I chose to use COPIC® markers.                                        One group of three flowers RVOOO, RVOO,  RV1O, RV11 was used.                                  A second group of three flowers RVOOO,  BVOOO, BVOO, BVO2, RV63 was used.        A third group of three flowers RVOOO, RV52, VO5, VO8 was used.  The greenery- YG61, YG63, YG67 was used. 

                                                                                                        

                                                                                                                     

The other supplies you will need besides the colored images are:                              Parklane® Glitter Brights card stock 5"x7"Cardbase                                      Lady E Designs® - Wave Edge®                  Sentiment Die of your choosing                    Nuvo® Glitter Drops - White Blizzard              EZ Tear® Tape                                              Foam® Tape                                                Iridescent Sequins (5-6)                            Lavender Yarn/Twine (stash)                        Small paint brush     

                                                                                                                                                                                                                                                                                                                Cut the images page in half.  The Sweet Peas Cluster 2 image is to be fussy cut.  Cut the curlies and twigs off of the image.                                                                                                  Set the sweet Peas Cluster 3 image to the side for now. 

                   

                                                                                                                                                                                                                                                                                                                                                                                        Apply Nuvo® Glitter Glue - White Blizzard to the outer edge of the flower petals.   Using a small paint brush pull the glitter glue from the outer edges in towards the center of the flower.  Do Not cover the whole flower.            Let Dry.

                                                                                                                                                        Cut the Sweet Peas Cluster 3 image to a 5" x 7" rectangle.  Using the Lady E® Designs wave edge die, apply 4-1/4" from the left edge at the top.  Run through Big Shot®.                                                                                                Align the die with the cut pattern for the last 1/2" and run through the Big Shot® to complete the decorative edge.                                                                                                      Repeat the Nuvo® Glitter Glue technique to the outer edge flower petals as shown.

                                                                                                                                                                                                                                                                                                                                                                                  Apply Foam® Tape to the backside of the fussy cut image.                                                                                                                          Carefully align the image to the image on the front card panel.  Peel and stick as shown.

                                                                          Cut a 1-1/2" x 7" rectangle of the Parklane® Lavender glitter stock.  Adhere to the back interior panel on the outer right edge as shown.                                                                                                                                          Using your Lady E Designs® - Wave Die, align on the front of cardbase with the backside of the die at 3-3/4" and lightly trace the backside edge to the front of the card and fussy cut as shown.                                                                

Align and adhere the image panel to the front cardbase front panel.

                                                                                                                                                                                                                                                                                                        Make sure your edges align as shown and the glittery interior panel can be seen through the lacey wave edge.

                                                                        Now let's see about embellishing this fresh card creation.                                                                                                                                Cut a sentiment of your choosing from the Lavender Glitter cardstock and adhere on the lower right front panel of card as shown.                                                                                      Randomly adhere several iridescent sequins around the flowers as shown.

                                                                                                                                                                                                                                                                                                                                                                            Using some delicate lavender yarn from my stash seem to add the perfect touch to my beautiful and fanciful Sweet Peas creation.

                                                                                                                                                                                                                                                                                                                                                                                            I always like to dress the backside of my cards as well, it is OPTIONAL...   Using scraps or additional pieces from making the card, I arrange and adhere with a name plaque to the backside of the card.

I hope you enjoyed my little journey through the flower garden!  Stop by my shop on Etsy and pick up your own bouquet of Sweet Peas!

HUGS,

Sweet Botanicals Card

 Welcome fellow crafters and flower lovers, I am so happy to see you and excited to share with you my new Sweet Botanicals #5130 Digital Stamp Set inspired by the mood board for our Beautiful Blossoms Challenge.   I love the vibrant colors.

    This is a 7"x5" card.  I would like to get you started with sizing and coloring the beautiful image of Sweet Botanicals Digital Stamp Set available at my shop on Etsy. 

  Size the image to 5-1/4"x3" and print on Hammermill 100 lb. White Coverstock.

 

Color your image as desired.   I chose to use Copic markers.

      I used:  

Y15,  Y17,  YR12,  YR14 on the lg. bloom

RV00,  RV02,  Pink Multiliner for the Rosebuds

RV00,  B00,  YR01 on Buds & Sm. Flowers

E30,  E33 on centers

YG61,  YG63,  YG67, Olive Multiliner on leaves.

W3 on shadows.

The supply list you will need:

5"x7" Cardbase and a 5"x7" Bright orange rectangle.   A 4-5/8"x6-5/8" Hot Pink rectangle.  Center the Pink on the Orange and adhere to the cardbase with the fold at the top.

Using the Large Amazon Metal Nesting Cutting Die to cut-out the "Sweet Botanicals" image.  Center and adhere to the Pink.

Using a small brush, apply glitter glue to the edges of the flower petals as shown.

Using the sentiment die, cut one in orange and one in the pink.  Adhere the Pink sentiment on the orange and off set just a small bit.   Then adhere the sentiment to the lower left of the image.

To embellish, cut 6 small squares and apply glitter glue to the front.  Let dry and adhere 3 in the upper left and 3 in the lower right as shown.    Wrap some orange baker's Cord twice around the fold and tie a bow.

OPTIONAL:  I always like to decorate the backside.  Using the small Amazon Metal Nesting Cutting Die,  Cut one in Pink and one in Orange.  Run the Orange through the Pink, lay flat and adhere to the backside with a name plaque as shown.

I hope you enjoyed this bright and fun summer time creation.  You can find this Image on Etsy.

I will be sharing this  "Sweet Botanicals" with Beautiful Blossoms.  Hope to join you again soon!

Hugs,

Jan

I am sharing with:

Beautiful Blossoms Challenge

Heirloom Roses Card

 Welcome fellow crafters and flower lovers!  I am so excited that you stopped by to share a part of your day with me.  This spring I was so inspired by my garden- my Knockout Roses went absolutely crazy!  Using Beautiful Blossom's Color Mood Board and the roses from my garden I created my NEW Heirloom Roses 5125J Digital Stamp Set available at my shop on Etsy.

 

These are the roses in my yard... awe inspiring!  I invite you to come along on my journey through the roses. 

They are just beautiful!!  

This is suggested as a 5"x7" card.  

I started this card going in one direction and ended up going a totally different direction after browsing through my stash.  Confined to home after my surgery, I'm discovering "stash goodies" that I had forgotten about!

You will need my Heirloom Roses 5125J  Digital Stamp Set.  Size the Roses to           5-5/8"x3-1/2".  I placed in a 5"x7" rectangle.   Copy and Paste the roses and place in the lower right corner.  You may need to rotate a bit to get it to fit.  Print on Hammermill® White 100lb. Coverstock.

Color your images as desired.  Everyone has their own favorite medium, mine is COPIC® Markers.

I chose a pink, peach and cream color for my roses:

Pink - RV00,  RV custom (50%RV00-50% RV02),  RV02 and RV55

Peach- R20,  R21,  R22

Cream - E50, E51, E53

Leaves - YG61, YG63, YG67

Some of the supplies I found in my stash for this project are as follows:

FSC® -Pretty Posey  (I liked for it's lattice effect and embossing.)

Core'dinations®  - Sugar-n-Spice  &  Pink

Small Pearl Mesh

(3) Medium Pearl halves

3/4" Pink Ribbon  (about 8")

1/2" Lace

Sentiment Die (I chose "Hello")

Cut a 5"x7" rectangle of FSC® -Pretty Posey for your card front.

Adhere the 1/2" lace centered on the 3/4" ribbon.

Adhere the ribbon & lace combo at 1" from the bottom of the FSC® -Pretty Posey to allow for the sentiment.  Be sure to wrap the ends of the ribbon & lace around to the back and adhere.   LET DRY!

Fussy cut both colored images.  One is to remain intact.  One is to be cut into parts as shown.

Wanting to give this image a 3D effect like a fresh bouquet, adhere one layer of foam tape to the backside of the Pink Rose and two layers of foam tape to the Cream Rose.

Carefully align the images and adhere as shown.

Adhere the FSC® -Pretty Posey rectangle to the front panel of your 5"x7" cardbase using EZ Tear® Tape.

Adhere your 3-D colored image along the ribbon & lace, offset to the right as shown.  Remember you still need room for your sentiment.

Cut the mesh pearls apart and adhere one at each of the crosses on the section using Bearly Art® Precision Glue above the ribbon as shown.

Adhere the three (3) medium half Pearls in the lower right corner as shown.

Cut two (2) of your sentiments:  One (1) of the Core'dinations® - Sugar-n-Spice and One (1) of the Core'dinations® - Pink.

Adhere one of the sentiments slightly offset of the other using Beary Art® Precision Glue and adhere in the lower left of the card front as shown.

I like my cards to have that something a little special...  as an option I use some of the scraps, additional parts, etc. to decorate the backside of my cards.  I also add a name badge as shown.

I hope you enjoyed this journey through my rose garden.  I know it made me feel better having the opportunity to share this beautiful spring day with you. 

I hope you will join us again at Beautiful Blossoms Challenge and share your delightful bouquets with us.

Hugs,

Jan    

I would like to share my Heirloom Roses with the following:

https://beautifulblossomschallenge.blogspot.com/